Enter MB BIOS and re-order the drives so that the newly created array is the first disk in the list.Ĩ. After POST, press CTRL + M to access the Marvell BIOS.Ħ. Don't worry, this won't destroy neither the array nor the data.).Ĥ. Enter MB BIOS and set the SATA III controller's operating mode to RAID (Note: If you also have the Intel (SATA II) controller set to RAID, set it to AHCI.

Download the latest Marvell 91xx drivers and burn it on a CD (the drivers in the supplied ASUS Support DVD will not work).ģ. This was seriously a headache for me, and there doesn't seem to be anything out there on this issue. The CTRL + M option you see after flashing to 0501 is a bit misleading, as the Windows install fails to 'see' the disk. Okay, I now have the Marvell RAID working and have finally been able to install Windows on it (Intel RAID is also working). But it semes not to work for me when I use this tip I have som Intel 510 x 2 on raid0 on Intel controller. This is the speed being achieved on the Gigabit Assassin Motherboard which features the exact same 9182 Marvell Controller. I expect that once an official BIOS is released for the Black Edition Motherboard along with some ASUS provided Marvell drivers we should see speeds around 1000MB/s. I have two 128GB OCZ Vertex 3 MAX IOPS SSD drives. I am using the leaked 0501 bios for this board and the latest Marvell drivers from the station drivers website. Yes, I am running the Rampage III Black Edition on the Marvell 88SE9182 Controller.

Download rampage iii black edition